- No tools required
- Multimeter (REQUIRED for voltage verification)
- Ability to connect connectors
- Following step-by-step instructions
- Basic understanding of battery safety
⚠️ CRITICAL: Read the Safety Guidelines completely before starting.
- Read all instructions completely before starting
- Understand lithium-ion battery hazards
- Organize components using the Bill of Materials
- Prepare a clean, well-lit workspace
- Have fire safety equipment nearby
Note: All connections are optional. Connect only the modules needed for your desired configuration.
TODO: Instructions for identifying modules and connectors
Safety Note: Handle modules carefully to avoid damage.
TODO: Instructions for connecting charging module
- Locate the charging module connector
- Align connector with matching port
- Press firmly until connector clicks into place
Note: Module configuration affects charging current. Connectors are keyed and can only be inserted one way.
TODO: Instructions for connecting boost converter module
Safety Note: Observe polarity markings on connectors.
TODO: Instructions for connecting protection module
Safety Note:
- Protection module is highly recommended for battery safety
- Verify module orientation before connecting
TODO: Input power connector instructions
Safety Note: Verify correct voltage and polarity before connecting.
TODO: Battery connection instructions
⚠️ CRITICAL SAFETY:
- Verify polarity three times before connecting battery
- Battery connector is keyed - ensure proper alignment
- Press firmly until connector clicks
- Never short battery terminals
TODO: Output connector instructions
Safety Note: Output connector is polarized. Observe markings.
Before applying power:
- Verify all desired connections are fully seated and clicked
- Check polarity markings on battery connector
- Confirm no exposed conductors or damage
- Double-check battery polarity if connected
TODO: Testing procedures without battery connected
- Connect input power (if not already connected)
- Measure voltages at test points with multimeter
- Verify LED indicators (if present)
- Check for any unusual heating
- Measure output voltage range
Note: You can disconnect and reconnect modules at any time to change configuration.
⚠️ WARNING: Only proceed if initial testing passed successfully.
TODO: Battery connection and testing procedures
- Connect known-good battery within specifications
- Monitor battery voltage during initial charge
- Monitor module temperatures
- Be prepared to disconnect battery immediately if issues occur
- Never leave charging battery unattended
Note: Battery connection is optional. System can be tested and used without battery attached.
Last Updated: TODO
Revision: See Revision Notes